3D print Zifeng Tower
A free, printable model of Zifeng Tower and the surrounding streets and buildings of Nanjing, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 450 m
- On a 160 mm print
- 122 mm
- Scale
- 1:3,750
450 m of Zifeng Tower, 122 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A very tall tower
The tower is extremely tall for its plan, so any wobble shows along its whole height. Printing slowly with good cooling keeps the upper floors clean, and a larger print makes the job easier.
- Small forms near the summit
The smallest details sit high on the tower, where they are easy to lose. Print friendly adapts them; Full detail with 0.12 to 0.16 mm layers holds them on a large print.
- One piece with the ground
Zifeng Tower is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Zifeng Tower takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Zifeng Tower
Zifeng Tower, also known as Greenland Center-Zifeng Tower, is a supertall skyscraper in Nanjing, Jiangsu, China, that rises 450 meters (1,480 ft). Completed in 2010, the 89-story building holds retail and office space, and it covers 18,721 square meters in total. It was formerly called Nanjing Greenland Financial Center.
The 89-story tower is given over to office, hotel and retail space, and its upper floors also hold several restaurants and a public observatory. Those restaurants and the public observatory sit at the very top of the tower, and the Nanjing Greenland InterContinental Hotel occupies part of the building.
The building's design came from Skidmore, Owings and Merrill, with Adrian Smith leading the work, and Shanghai Construction Group was the main contractor on the building. The tower rises 450 meters (1,480 ft) to its pinnacle, while the highest occupied floor sits at 316 meters, well below the tower's top.
About this model
Zifeng Tower is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
