3D print Nauru House
A free, printable 3D model of Nauru House and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Nauru House in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 190 m
- On a 160 mm print
- 51 mm
- Scale
- 1:3,750
190 m of Nauru House, 51 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slow down for the tower
A tall building gives each layer little time to cool near the top. Printing slowly with good cooling, and a layer height of 0.12–0.16 mm, keeps the upper floors crisp.
- One piece with the ground
Nauru House is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Nauru House takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Nauru House
Nauru House, which also goes by the address 80 Collins Street, is a landmark tower of 52 stories in the central business district of Melbourne, Victoria, Australia. The firm Perrott Lyon Timlock & Kesa designed it, and it was completed in 1977. It is listed at 190 m tall.
The tower takes its name from Nauru. The Nauru Phosphate Royalties Trust was established to invest the island nation's phosphate profits in international real estate, and it bought the site where Exhibition Street meets Little Collins Street in 1972 for A$19 million. Older buildings on the Collins Street side were demolished, and the tower gained its 80 Collins Street address from the gap they left.
Finished in 1977, it held the title of Melbourne's tallest building for a short time. It did not become Australia's tallest, since the same builder had finished the taller MLC Centre in Sydney only months before. The first Collins Place tower passed it in 1978. In 1991 the exterior was encased in matte-gray aluminum after the pebble finish of the concrete cracked and decayed. Queensland Investment Corporation bought the building for A$140 million in December 2004.
About this model
Nauru House is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
