3D print the New Synagogue
A free, printable model of the synagogue on Oranienburger Straße, with the surrounding streets and buildings of Berlin, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 14 mm
- Scale
- 1:3,750
14 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Dome and towers
Ornamental detail around a dome can soften at a small size. Print larger or use Print friendly, and keep layers at 0.12–0.16 mm for the dome and towers.
- One piece with the ground
The New Synagogue is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The New Synagogue takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the New Synagogue
This mid-19th-century synagogue stands on Oranienburger Straße in Berlin and served as the Jewish community's principal place of worship, taking over from the Old Synagogue. Moorish in style and reminiscent of the Alhambra, it ranks as an important architectural monument in Germany. Eduard Knoblauch produced the design. When he died in 1865, Friedrich August Stüler saw most of the building work through and shaped the interior, and the synagogue opened in 1866 with Count Otto von Bismarck present.
Polychrome brickwork covers the Oranienburger Straße front, with sculpted brick and terracotta ornament and touches of glazed brick. Gilded ribs crown the main dome, and two smaller domes of pavilion form sit on the side wings. Seating in the main hall ran to 3,000. Iron work in the exterior columns and the dome marks the building as an early example of iron construction.
At the time it was Germany's largest synagogue, and its rooms hosted public concerts, among them a 1930 violin concert with Albert Einstein. The building came through Kristallnacht, but damage before and during World War II was severe and large parts were later pulled down. What stands now reconstructs the ruined street front, with entrance, dome and towers and a handful of rooms behind; it stops short of the old main hall.
About this model
The New Synagogue is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
