3D print the German Historical Museum
A free, printable model of the German Historical Museum and the streets and buildings around Unter den Linden in Berlin, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 6 mm
- Scale
- 1:3,750
6 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Courtyard and roofline
The museum is a broad, low complex with a large inner courtyard. Print friendly adapts the courtyard walls and roof details to the print size; a larger print keeps them clearer.
- Fine façade detail
The baroque front carries small window, statue and roof details. Use 0.12 to 0.16 mm layers and a fine nozzle if you choose Full detail.
- One piece with the ground
The German Historical Museum is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The German Historical Museum takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the German Historical Museum
The German Historical Museum, or DHM, is a museum in Berlin devoted to the history of Germany. It occupies the 17th-century Zeughaus, an armory on Unter den Linden, with Museum Island lying across the Spree River. The building dates from 1695 and is the oldest on the street. A separate Exhibition Hall, designed by I. M. Pei during the late 20th century, is attached to it.
The museum was founded on October 28, 1987, the 750th anniversary of Berlin's founding, and inaugurated in the Reichstag building in what was then West Berlin. After the fall of the Berlin Wall, the federal government gave the DHM the former Museum for German History's collection and premises on October 3, 1990, and the Zeughaus became its home. The first exhibitions opened there in September 1991.
Work on the Zeughaus façade ran from 1994 to 1998. From 1998 to 2003 the building closed for further restoration by the office of Winfried Brenne, while I. M. Pei's new hall rose alongside it. That hall covers 2,700 square meters on four floors and opened in 2003 to host temporary exhibitions. The permanent exhibition followed in the Zeughaus in 2006.
About this model
The German Historical Museum is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
