A white 3D print of the New Synagogue of Graz, a square block topped by a ribbed dome, standing on an open plaza beside a patch of green, nearby streets and taller buildings.

New Synagogue of Graz in 3D

The New Synagogue of Graz appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • New Synagogue of Graz model, North view North
  • New Synagogue of Graz model, East view East
  • New Synagogue of Graz model, South view South
  • New Synagogue of Graz model, West view West

© OpenStreetMap contributors

Copyright notice

The design of New Synagogue of Graz may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.

On a 160 mm print
5 mm
Scale
1:3,750

5 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Ribbed dome

    The dome is crossed by thin ribs and panels. Full detail keeps them on a large print, while Print friendly thickens them for a small one. Layers of 0.12-0.16 mm keep the curve smooth.

  2. Small entrance details

    Short columns and low blocks sit around the base of the square body. A larger print size keeps these small details; a smaller one may merge them.

  3. One piece with the ground

    The New Synagogue of Graz is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The New Synagogue of Graz takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the New Synagogue of Graz

The New Synagogue of Graz stands on David-Herzog-Place, on the Mur River's right bank in the city's Gries neighborhood. The Jewish congregation behind it formed in 1868 and built its first synagogue on this site. The Nazis destroyed that building in 1938 on Kristallnacht, and the reduced congregation used temporary premises until the present building was completed in 2000. It serves the Jewish residents of Graz and Styria, as well as of Carinthia and southern Burgenland.

Every party on Graz's municipal council resolved, on October 21, 1998, to reconstruct the synagogue. Architects Jörg and Ingrid Mayr worked from plans by the artist Fedo Ertl. About 9600 bricks from the old synagogue were reused, after more than 150 students washed them, putting in more than 10,000 hours of work. A black steel obelisk built on the site in 1988 was folded into the project and lies under the Bimah. It was consecrated and opened on the anniversary of Kristallnacht, November 9, 2000.

The building is largely Modernist, though its design recalls several general aspects of the destroyed synagogue. It is made primarily of brick, reinforced concrete and glass, and its cube and sphere form a central space. Inside, a glass Bimah stands in the middle of the sanctuary, which is dominated by a glass dome carried on twelve metal pillars, which stand for Israel's Twelve Tribes.

About this model

The New Synagogue of Graz is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits