3D print the Osaka Prefectural Government Sakishima Building
A free, printable model of the Osaka Prefectural Government Sakishima Building, a tall tower topped by an inverted pyramid, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Osaka Prefectural Government Sakishima Building in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 256 m
- On a 160 mm print
- 69 mm
- Scale
- 1:3,750
256 m of the Osaka Prefectural Government Sakishima Building, 69 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Inverted pyramid crown
The top is a wide inverted pyramid that overhangs the shaft. Print friendly adapts overhangs and thin parts to the print scale; Full detail keeps every feature on a larger print.
- Slender shaft and lattice hall
The tall shaft carries fine vertical lines, and a lattice-roofed hall stands beside its base. A layer height of 0.12–0.16 mm and a bigger print size keep them crisp.
- One piece with the ground
The Osaka Prefectural Government Sakishima Building is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Osaka Prefectural Government Sakishima Building takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Osaka Prefectural Government Sakishima Building
The Osaka Prefectural Government Sakishima Building, also called Cosmo Tower, rises 256 m (840 ft) in Suminoe-ku, Osaka, at Nanko Cosmo Square near Osaka harbor. Until 2023 it was known as the Osaka World Trade Center Building or WTC Cosmo Tower. It matches the height of Izumisano's Rinku Gate Tower Building.
Inside are three basement levels, along with a museum, restaurants, offices, a conference room and a skylobby. An observation deck occupies an inverted pyramid at the very top. The governor of Osaka Prefecture has a working office in the building. The tower has 55 floors above ground and opened in 1995, and Osaka Prefecture has owned it since 2010. Its architects are listed as Nikken Sekkei and Mancini•Duffy.
About this model
The Osaka Prefectural Government Sakishima Building is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
