3D print Padua railway station
A free, printable model of Padua railway station, a long low building beside many tracks and platforms, with roads and city buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Padua railway station in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 3 mm
- Scale
- 1:3,750
3 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A long, low building
The station is a long, flat-roofed block, so the printed landmark is low. A bigger print size gives its facade and the platforms around it more detail.
- A row of slim supports
Slim supports line the front of the building. Print friendly adapts thin parts at small sizes; Full detail with a 0.12-0.16 mm layer height keeps them crisp.
- One piece with the ground
Padua railway station is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Padua railway station takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Padua railway station
Padua railway station, Stazione di Padova in Italian and at times called Padova Centrale, is the principal station of Padua, in the Veneto region of northeastern Italy. It opened in 1842 and lies on the Milan-Venice railway. Direct branch lines split off here toward Bologna, Bassano and Camposampiero, and the short railway to Padua Interporto ends here. The station sits on the Piazzale Stazione, north of the historic city center.
The passenger building holds both passenger facilities and commercial activities, such as ticket sales, customer support, left luggage and a railway police office. The passenger yard has eleven loops, nine of them with platforms, while the other two are used for maneuvers and for stabling trains. A locomotive depot is wedged between the Milan and Bologna lines.
Direct services reach Venice, Milan, Bologna, Florence, Rome and many other Italian cities, and abroad, trains run to Geneva, Lausanne, Zürich, plus Innsbruck, Munich and Vienna. Freight trains pass through without stopping, because freight facilities were absent from the station from the 1990s on. Most city bus routes end at the forecourt facing the passenger building, as does the Translohr line, which locals call simply the tram.
About this model
Padua railway station is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





