A white 3D print of the Palace of Ardashir, a palace with three domes, a tall arched iwan and a courtyard of low walls, beside a small pond and a curving road.

3D print the Palace of Ardashir

A free, printable model of the Palace of Ardashir, with its three domes, tall arched iwan and courtyard of low walls, beside a pond and a curving road, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Palace of Ardashir model, North view North
  • Palace of Ardashir model, East view East
  • Palace of Ardashir model, South view South
  • Palace of Ardashir model, West view West

© OpenStreetMap contributors

The model you print

Palace of Ardashir in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
8 mm
Scale
1:3,750

8 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Domes, iwan arch and low walls

    Three domes and a tall arched iwan stand beside a courtyard of low, broken walls with arched openings. Full detail keeps the arches on a larger print; Print friendly adapts thin walls at small sizes.

  2. One piece with the ground

    The Palace of Ardashir is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  3. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  4. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Palace of Ardashir takes the building color.

  5. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Palace of Ardashir

The Palace of Ardashir Bābakān, also called the Ātashkadeh ('Fire Temple'), is a castle on the slopes of the mountain that holds Qal'eh Dokhtar. It was built in AD 224 by Ardashir I, king of the Sasanian Empire. It stands north of Gor, an ancient city in Pars, in ancient Persia (Iran), at a distance of two kilometers (1.2 miles). Ardashir overthrew Ardavan, the last Parthian king, and established the Sasanian Empire; the city was then renamed Peroz, and after the Arabian conquest it became Firuz. The modern city of Firuzabad matters greatly to the history of Persia and to Sasanian archaeology.

The structure has three domes, among other features, and is somewhat larger and grander than the nearby castle of Dezh Dokhtar that came before it. The compound seems to have been made to display the royal image of Ardashir I rather than to defend against attack, which is why it may be best called a palace, even though its perimeter walls are huge and twice as thick as those of Qal'eh Dokhtar. Its layout suggests a place for social gatherings, where guests were presented to the imperial throne, and its design is particular to the architects of Fars.

A pond fed by a natural spring lay next to the palace, perhaps linked to Anahita, a Persian goddess of water and growth. Its sides were tiled and it was surrounded by pavement. The structure measures 104 m (340 ft) in one direction and 55 m (180 ft) in the other. The iwan reaches 18 m (60 ft) in height, though it has partly collapsed. Local rocks and mortar were used, with plasterwork inside.

About this model

The Palace of Ardashir is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits