3D print the Sarvestan Palace
A free, printable model of the domed palace and the open ground around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Sarvestan Palace in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 5 mm
- Scale
- 1:3,750
5 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Domes and deep arches
The large central dome and the smaller dome are smooth curves, and the arched openings are deep. Printing slowly with a 0.12–0.16 mm layer height keeps the curves clean.
- Small arched recesses
The walls carry many small arched recesses. Print friendly adapts them to the print scale; Full detail keeps every one and suits a larger print.
- One piece with the ground
The Sarvestan Palace is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Sarvestan Palace takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Sarvestan Palace
Sarvestan Palace, also called the Sassanid Palace of Sarvestan, is a building from the Sassanid era in the Iranian city of Sarvestan, about 90 km southeast of Shiraz. It dates to the middle of the 7th century: work probably started late in the Sasanian period and was finished after the Arab conquest. It was either a governor's residence or a Zoroastrian fire temple.
Calling it a palace is considered misleading, since the function of the monument is obscure. A small building just north of it, also of unknown purpose, suggests it could have served as a hunting lodge or a sanctuary. Arriving from the south, a visitor would have faced three iwans, passed through the central one into a large square hall beneath a big baked-brick dome, and then reached a rectangular courtyard ringed by residential quarters.
Stone and mortar went into the building, which must have had fine decoration, and part of it survives. The building recalls the palace of Ardashir and Ghal'eh Dokhtar, both close to Firuzabad, with one difference: Sarvestan is open on every side. It belongs to the UNESCO-listed Sassanid Archaeological Landscape of Fars Region, which has eight sites.
About this model
The Sarvestan Palace is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





