3D print Park Inn by Radisson Berlin Alexanderplatz
A free, printable model of the hotel tower on Alexanderplatz in Berlin, with its base building and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 125 m
- On a 160 mm print
- 41 mm
- Scale
- 1:3,750
125 m of Park Inn by Radisson Berlin Alexanderplatz, 41 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Masts and roof details
The roof masts and the smaller details are the finest parts to watch on a hotel tower of this kind. Print friendly adapts thin parts to the print scale; Full detail keeps every modeled feature for a larger print or a fine nozzle.
- One piece with the ground
Park Inn by Radisson Berlin Alexanderplatz is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Park Inn by Radisson Berlin Alexanderplatz takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Park Inn by Radisson Berlin Alexanderplatz
The hotel Park Inn by Radisson Berlin Alexanderplatz occupies a 41-floor skyscraper on the northeast side of Alexanderplatz in Berlin's Mitte district. At 125 m (410 ft), it is Berlin's second tallest building and Germany's tallest hotel-only building. Construction ran from 1967 to 1970 during the redevelopment of Alexanderplatz, when the area lay in East Berlin.
The design came from Roland Korn and Heinz Scharlipp, working with Hans Erich Bogatzky. The hotel opened under the name Hotel Stadt Berlin and belonged to East Germany's Interhotel chain. A panoramic restaurant occupied the 37th floor, and the elevators were unusually fast for the period. After German reunification it was refurbished in 1993 and renamed Forum Hotel Berlin; in 2003 it became Park Inn Berlin-Alexanderplatz and later Park Inn by Radisson Berlin Alexanderplatz.
The building has a public viewing platform on its roof. In October 2006 two 35 m (115 ft) antenna masts were added, bringing its total height to 149.5 m (490 ft). A three-story commercial building forms the base of the tower, and the hotel rooms were refurbished starting in 2001.
About this model
Park Inn by Radisson Berlin Alexanderplatz is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
