3D print Pergamon Museum
A free, printable model of the Pergamon Museum, its long three-winged block, and the streets and buildings of central Berlin around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 9 mm
- Scale
- 1:3,750
9 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A wide, low museum block
The museum is broad rather than tall, so the model's height is modest at the default size. A bigger print gives the long wings room, and 0.12–0.16 mm layers keep their roofline sharp.
- Long, straight wings
The three wings make long, straight runs in the model, where any wobble shows. Print it larger, and use 0.12–0.16 mm layers to keep the long walls clean.
- One piece with the ground
Pergamon Museum is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Pergamon Museum takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Pergamon Museum
The Pergamon Museum occupies a listed building on Museum Island, in the historic center of Berlin, Germany. Emperor Wilhelm II ordered it, and following designs by Alfred Messel and Ludwig Hoffmann it was built in the Stripped Classicism style between 1910 and 1930. In 1999, with the Museum Island complex, it entered the UNESCO World Heritage List, for its architecture and as testimony to how museums evolved as architectural and social phenomena.
Wilhelm von Bode ran the Kaiser-Friedrich-Museum and proposed a new museum nearby for ancient architecture, for German art of the post-antique period, and for Middle Eastern and Islamic collections. That museum had opened in 1904 with no room for everything being excavated in Babylon, Uruk, Assur, Miletus and Priene. Messel began the design in 1906 and died in 1909; his friend Ludwig Hoffmann then took over, and work ran from 1910 through the First World War and the inflation of the 1920s. It opened in 1930.
The museum brought together three collections. The Antikensammlung held the Pergamon Altar, whose sculptural frieze runs 113 m (371 ft) and shows gods fighting giants. The Vorderasiatisches Museum displayed Babylon's Ishtar Gate and its Processional Way, and the Museum für Islamische Kunst opened in 1932, on the south wing's upper floor. Air attacks late in the Second World War severely damaged it, and most objects taken by the Red Army in 1945 were returned in 1958.
About this model
Pergamon Museum is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
