3D print Perth Amboy City Hall
A free, printable 3D model of Perth Amboy City Hall, with its steep dormered roof, and the park, streets and buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 5 mm
- Scale
- 1:3,750
5 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Steep roof with dormers
The roof has a steep section with small dormers and a rooftop chimney. Print friendly adapts these thin details to the print scale, and Full detail keeps them on larger prints.
- One piece with the ground
Perth Amboy City Hall is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Perth Amboy City Hall takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Perth Amboy City Hall
Perth Amboy's City Hall, in Middlesex County, New Jersey, is a historic building from the early 18th century. It is called the country's oldest public building still in continuous use. Work started in 1714 and ended in 1717. It was the local courthouse as well as a jail, and the Provincial Assembly also used it until 1775.
Fire badly damaged the building twice. It was rebuilt from 1731 until 1745, and again around 1765 after an arson attack that was believed to be the work of a former inmate held over debts, with a second rebuilding in 1767. City Hall has had three renovations, the most recent in 2006, though part of the original structure remains. In style, it is Victorian.
A Surveyor General's Office with two rooms was put up next door in 1867, for the General Board of Proprietors in the Eastern Division. On January 12, 1981, both buildings joined the National Register of Historic Places. A statue of George Washington, in terra cotta and made by Nels N. Alling, was dedicated on February 22, 1896 in Market Square beside City Hall. The Scandinavians of Perth Amboy gave it as a gift.
About this model
Perth Amboy City Hall is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
