A white 3D print of the Pul-e Khishti Mosque, a boxy building with a large central dome and one slender minaret, beside a waterway and roads.

Pul-e Khishti Mosque in 3D

The Pul-e Khishti Mosque appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Pul-e Khishti Mosque model, North view North
  • Pul-e Khishti Mosque model, East view East
  • Pul-e Khishti Mosque model, South view South
  • Pul-e Khishti Mosque model, West view West

© OpenStreetMap contributors

Copyright notice

The design of Pul-e Khishti Mosque may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.

On a 160 mm print
12 mm
Scale
1:3,750

12 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Tall, thin minaret

    A single slender minaret with a small balcony rises beside the dome. Print friendly adapts it to the print scale; Full detail keeps it on a larger print. Printing slowly with good cooling helps tall thin parts.

  2. Rows of arched windows

    Two tiers of small arched windows run along the walls. A layer height of 0.12–0.16 mm and a bigger print size keep them readable.

  3. One piece with the ground

    The Pul-e Khishti Mosque is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Pul-e Khishti Mosque takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Pul-e Khishti Mosque

Kabul's largest mosque is the Pul-e Khishti Mosque, in Afghanistan. It stands in the center of old Kabul, where its large blue dome makes it easy to pick out. First erected in the late 18th century, it saw large-scale rebuilding under Zahir Shah's rule in the late 1960s.

Fighting in the 1990s damaged the mosque, and it had been fully restored by 2019. Kabulis often assert that, during many early 20th-century years, its imam was an English convert to Islam. According to the same account, he went home to England after leaving the post.

About this model

The Pul-e Khishti Mosque is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits