Rødven Stave Church in 3D
Rødven Stave Church appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.
-
North
-
East
-
South
-
West
Copyright notice
The design of Rødven Stave Church may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.
- On a 160 mm print
- 6 mm
- Scale
- 1:3,750
6 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Thin spire and slanted posts
The slim spire on the roof tower and the slanted support posts along the walls are delicate. Full detail keeps them at larger print sizes; printing slowly helps the spire stay clean.
- One piece with the ground
Rødven Stave Church is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Rødven Stave Church takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Rødven Stave Church
Rødven Stave Church is a former parish church of the Church of Norway, in the village of Rødven in Rauma Municipality, Møre og Romsdal county, Norway. It seats about 100 people. It is regarded as a Møre-type stave church, a classification based on its construction and on the posts that brace the outside walls. A new church for the village was built across the street in 1907, and the old church has not been regularly used since then.
The earliest surviving records date to 1547. A wooden stave church probably from the 1100s first stood on the site, as an annex of the Old Veøy Church parish. After nearly 200 years it was torn down and replaced by a new stave church. The nave measures 9 by 6.4 meters (30 ft × 21 ft). In 1689 a storm tore the tower from the roof, and in 1712 builder Hans Knutsen of Molde led a major renovation, adding exterior support beams, a new porch, a new roof and tower, and a new altar and pulpit.
In 1908 a society that preserves Norwegian ancient monuments bought the old stave church and runs it as a museum. A single worship service is still held each year on Olsok, the evening before St. Olav's Day. An archaeological survey in 1962-1963 led by Håkon Christie found evidence of posts from an older building on the same spot, and many artifacts under the floor.
About this model
Rødven Stave Church is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





