A white 3D print of the Reinli Stave Church, a small wooden church with a steep roof and slim spire, ringed by a path on a green hillside beside a road.

3D print the Reinli Stave Church

A free, printable 3D model of the Reinli Stave Church and the grassy hillside, path and road around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Reinli Stave Church model, North view North
  • Reinli Stave Church model, East view East
  • Reinli Stave Church model, South view South
  • Reinli Stave Church model, West view West

© OpenStreetMap contributors

The model you print

Reinli Stave Church in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
4 mm
Scale
1:3,750

4 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Slim spire on the roof

    The thin spire on the roof ridge is the most delicate part. Print slowly, with good cooling, at 0.12–0.16 mm layers, or use Full detail on a larger print to keep it crisp.

  2. One piece with the ground

    The Reinli Stave Church is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  3. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  4. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Reinli Stave Church takes the building color.

  5. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Reinli Stave Church

Reinli Stave Church, in the village of Reinli in Sør-Aurdal Municipality, Innlandet county, Norway, is a preserved parish church belonging to the Church of Norway. It is a brown wooden church in a long church design, drawn up by an unknown architect. Not counting the apse, it is roughly 11.5 by 5.6 meters (38 ft × 18 ft) in size, and an open-air corridor runs around the whole building.

Its age is debated. Radiocarbon dating placed logs in the church at 1190, with other nave beams at 1225 and 1272, but most historians say it went up in the late 13th century. A written account from 1327 proves it existed by then. An earlier church on the same site burned down first, and the choir apse is thought to be slightly newer than the rest.

In 1734 a decision was made to demolish the church, but protests from Reinli saved it. A new Reinli Chapel opened across the road in 1965 and took over as the parish church. The old church is used only for special occasions in summer. The only medieval fixtures that survive in the church are its altarpiece and baptismal font.

About this model

The Reinli Stave Church is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits