3D print the Rafal Tower
A free, printable model of Rafal Tower, a tall slender tower with a rounded profile and two thin spires, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Rafal Tower in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 308 m
- On a 160 mm print
- 84 mm
- Scale
- 1:3,750
308 m of the Rafal Tower, 84 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Two thin spires on top
Two slender spires rise from the rounded roof. Print friendly adapts them to the print scale; Full detail keeps them on a larger print. Print slowly with cooling for the thin tips.
- Tall shaft with fine lines
The tall shaft carries fine vertical and horizontal lines. A layer height of 0.12–0.16 mm and a bigger print size keep them crisp.
- One piece with the ground
The Rafal Tower is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Rafal Tower takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Rafal Tower
Rafal Tower, also called Burj Rafal, rises in Riyadh, Saudi Arabia, as a hotel skyscraper. Its 70 floors stand on a plot of 20,000 sqm, and it opened in January 2014. The tower is 308 m tall with about 350 rooms. It is Riyadh's tallest residential building and ranks among the tallest hotels worldwide. The total cost came to about $320 million.
The design pairs a glass façade with local stone cladding on the podium, giving a modern reading of local building traditions. Concrete and steel form the structural system. Sustainability features include energy-efficient systems, lighting controls that respond to occupancy, and condensate water from air conditioning being reused for irrigation. P&T Architects & Engineers Ltd. is listed as both architect and structural engineer.
About this model
The Rafal Tower is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
