A white 3D print of the Rhode Island State House, a wide building with a large central dome and four small corner cupolas, standing on open lawns with roads around it.

3D print the Rhode Island State House

A free, printable model of the Rhode Island State House in Providence, with its central dome, corner cupolas and the lawns and roads around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Rhode Island State House model, North view North
  • Rhode Island State House model, East view East
  • Rhode Island State House model, South view South
  • Rhode Island State House model, West view West

© OpenStreetMap contributors

The model you print

Rhode Island State House in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

Real height
85 m
On a 160 mm print
23 mm
Scale
1:3,750

85 m of the Rhode Island State House, 23 mm on your shelf

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Dome and four cupolas

    The ribbed dome, its colonnaded drum and the small cupolas at the corners are the most delicate parts. Use Full detail on a larger print, or a 0.12 mm layer height, to keep them crisp.

  2. Slender lantern on top

    The small lantern at the top of the dome is the thinnest vertical part. Print the tallest section slowly with good cooling, or choose Print friendly so it adapts to the print scale.

  3. One piece with the ground

    The Rhode Island State House is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Rhode Island State House takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Rhode Island State House

The Rhode Island State House serves as the state capitol of Rhode Island. Its address is 82 Smith Street, a little below the top of Smith Hill, at the edge of downtown Providence. The New York firm McKim, Mead & White designed it in the neoclassical style, and building work ran from 1891 to 1901.

The building is made of white Georgia marble, with 15 million bricks and iron floor beams. Its dome is ranked fourth in size among self-supported marble domes worldwide. On top stands a gold-covered bronze statue called The Independent Man, which represents freedom and independence. The figure measures 11 feet (3.4 m) in height and reaches 278 feet (85 m) up from the ground.

Inside, the General Assembly meets in the two wings, with the House of Representatives occupying the west wing and the Senate the east one. Four statewide officials have offices here too: the governor, the lieutenant governor, the secretary of state and the general treasurer. Its listing on the National Register of Historic Places dates from 1970.

About this model

The Rhode Island State House is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Outside the United States this design may still be protected; check the rules where you sell.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits