A white 3D print of Saint Cyriakus, Gernrode, a long church with two round towers capped by cones, a transept and rounded apses, among curving streets and houses.

3D print Saint Cyriakus, Gernrode

A free, printable model of Saint Cyriakus, Gernrode, a long church with two round towers topped by cones, a transept and rounded apses, among curving streets and houses, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Saint Cyriakus, Gernrode model, North view North
  • Saint Cyriakus, Gernrode model, East view East
  • Saint Cyriakus, Gernrode model, South view South
  • Saint Cyriakus, Gernrode model, West view West

© OpenStreetMap contributors

The model you print

Saint Cyriakus, Gernrode in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
10 mm
Scale
1:3,750

10 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Two slender conical towers

    Both round towers end in tall cones with small crosses on top. Print friendly adapts the crosses to the print scale; print slowly with good cooling, and use Full detail on a larger print.

  2. Rows of small windows

    The nave walls and towers carry many small arched windows. A layer height of 0.12–0.16 mm and a bigger print size keep them crisp.

  3. One piece with the ground

    Saint Cyriakus, Gernrode is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Saint Cyriakus, Gernrode takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Saint Cyriakus, Gernrode

The medieval church of Saint Cyriakus stands at Gernrode, in Saxony-Anhalt, Germany. Margrave Gero built it between 959/960 and 965, and it counts among the few Ottonian buildings to survive, although 19th-century work restored it. Until 1614 it served as the collegiate church of Gernrode Abbey, another of Gero’s foundations. Both church and abbey turned Protestant around the middle of the sixteenth century.

The main body consists of a nave with two aisles, an eastern transept and a westwork with a tower on each side. Together with these features, the church has touches that look ahead to Romanesque design: pillars and columns that alternate, thick walls, and semi-blind arcades in the galleries along the nave. Gero’s tomb is in the crossing, where a sandstone slab shows his likeness in armor, holding a sword and a flag, with a lion at his feet.

In the southern aisle stands a replica of the tomb of Christ, probably made between 1080 and 1130. Of its kind, it is the oldest in Germany, and its sculpture is judged a masterwork of early Romanesque statuary. The westwork’s two towers were taken down and rebuilt on stronger foundations between 1907 and 1910. The church lies on the tourist route known as the Romanesque Road.

About this model

Saint Cyriakus, Gernrode is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits