3D print San Francisco City Hall
A free, printable model of San Francisco City Hall and the surrounding Civic Center streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 94 m
- On a 160 mm print
- 26 mm
- Scale
- 1:3,750
94 m of San Francisco City Hall, 26 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Dome above a long block
The dome is the highest part of the model, sitting over a long, symmetrical block. Print it large enough for the dome to read, and keep Full detail so its surface stays sharp.
- Flat rows of windows
The front is a wide, flat arrangement of window rows and cornices. Layers of 0.12 to 0.16 mm keep those horizontal lines crisp, and Print friendly adapts the smallest pieces at small sizes.
- One piece with the ground
San Francisco City Hall is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. San Francisco City Hall takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About San Francisco City Hall
San Francisco City Hall, in California, houses the city and county government. It opened in 1915 in the Civic Center. The design is Beaux-Arts, a monument to the City Beautiful movement, which epitomized the American Renaissance that ran from the 1880s to 1917. An earlier City Hall, destroyed in the 1906 earthquake, stood two blocks away, and this building replaced it.
Arthur Brown, Jr., of Bakewell & Brown, was the principal architect, and his attention to finishing details reached the doorknobs and the typeface used on signs. The building occupies two full city blocks, with over 46,000 m2 (500,000 square feet) of open space. Its dome, which draws on Mansart's Baroque domes at the Val-de-Grâce and Les Invalides in Paris, stands 93.7 m (307.5 ft) high above the Civic Center Historic District and measures 34 m (112 ft) across.
The exterior is Madera County granite, with Indiana sandstone inside, and Henri Crenier made much of the statuary. Joe DiMaggio and Marilyn Monroe held their wedding at City Hall in January 1954. The Loma Prieta earthquake of 1989 twisted the dome four inches on its base, and after a seismic upgrade the building came back into use in January 1999.
About this model
San Francisco City Hall is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
