3D print the San Juan Villicum Circuit Pit Building
A free, printable model of the San Juan Villicum Circuit Pit Building, a long garage podium with tiered seating and two bowed canopy wings, with surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 5 mm
- Scale
- 1:3,750
5 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Canopy masts and stays
Tall masts with corner stays rise above two bowed canopy wings. Print friendly adapts the thin stays and mast tips; Full detail and a larger print keep them distinct.
- Garage mouths and seat rows
Open garage mouths sit below tiered seating, with thin rails along the aisles. Use 0.12–0.16 mm layers so the rails and seat rows read, and print slowly for the masts.
- One piece with the ground
The San Juan Villicum Circuit Pit Building is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The San Juan Villicum Circuit Pit Building takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the San Juan Villicum Circuit Pit Building
The San Juan Villicum Circuit Pit Building stands on Ruta Nacional 40 in Albardón, San Juan, Argentina. The provincial planning document describes the main building as containing 33 pits, 2,002 seats in the stands, toilets and a technical inspection room. Work on the layout and requirements of the pit building ran from 2016 to 2018, to meet the demands of the highest-level FIA and FIM events.
In August 2018, the pit buildings, medical clinic, technical room and toilets were reported to be practically finished. The circuit was inaugurated in October 2018 with the World Superbike Championship. The provincial sports secretariat lists the pits as complete and equipped.
About this model
The San Juan Villicum Circuit Pit Building is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
