3D print San Miniato al Monte
A free, printable model of San Miniato al Monte, its bell tower and monastery buildings, with the grassy hillside, paths and houses around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
San Miniato al Monte in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 9 mm
- Scale
- 1:3,750
9 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Bell tower and patterned facade
The square bell tower and the arched facade are the delicate parts. Landmark detail set to Print friendly keeps them sturdy, while a larger print or Full detail and a 0.12–0.16 mm layer height keep the facade crisp.
- One piece with the ground
San Miniato al Monte is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. San Miniato al Monte takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About San Miniato al Monte
San Miniato al Monte is a Florentine basilica set on one of the city's highest points, in central Italy; its name translates as St. Minias on the Mountain. It has been called one of Tuscany's finest Romanesque structures and among Italy's most picturesque churches. An Olivetan monastery adjoins it. Bishop Alibrando began building the present church in 1013, and Emperor Henry II endowed it.
The marble facade, with its geometric pattern, was probably begun about 1090, though the upper levels come from the 12th century or later. An eagle crowns the facade, the symbol of the Florentine Arte di Calimala, the cloth merchants' guild, which looked after the church from 1288. In 1499 the campanile collapsed, and a replacement went up in 1523 but was never finished. In the siege of Florence of 1530, Michelangelo had mattresses wrapped around it as protection from enemy fire.
Inside, the choir is raised on a platform above a large crypt, the oldest part of the church. The patterned pavement dates from 1207, and an apse vault mosaic shows Christ flanked by the Virgin and St Minias, dating from 1297. Walls around the whole complex were first raised by Michelangelo during the siege and expanded in 1553 into a fortress by Cosimo I de' Medici. Inside them lies the monumental cemetery of Porte Sante, laid out in 1854.
About this model
San Miniato al Monte is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline





