Santa Justa Lift in 3D
The Santa Justa Lift appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.
-
North
-
East
-
South
-
West
Copyright notice
The design of Santa Justa Lift may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.
- Real height
- 45 m
- On a 160 mm print
- 13 mm
- Scale
- 1:3,750
45 m of the Santa Justa Lift, 13 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slim tower and long walkway
The slim tower and the long walkway reaching out from its top are thin parts. Print friendly adapts them to the print scale; printing slowly with good cooling helps the upper platform.
- One piece with the ground
The Santa Justa Lift is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Santa Justa Lift takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Santa Justa Lift
The Santa Justa Lift, also called the Carmo Lift, is an elevator in Lisbon, Portugal, set in the historic center within the Santa Maria Maior parish. It stands where Rua de Santa Justa ends and links the Baixa's lower streets to the higher Largo do Carmo. It is the sole conventional vertical lift left among the city's urban lifts. Others, such as the Elevador da Glória, are funicular railways.
A metal tower, an observation platform, a walkway and a base make up the structure. The tower is 45 meters high and covers seven stories. Two cabins inside, finished with wood, mirrors and windows, each initially carried 24 passengers. A lookout with panoramic city views occupies the top floor, and two spiral staircases connect the floors below. Its ironwork decoration is Neo-Gothic.
On August 31, 1901, King Carlos officially opened the metal bridge and its awning, and the operating car was inaugurated on July 10, 1902. In 2002 the lift marked its first centenary, and it was classified as a National Monument that year, as were the Lavra, Glória and Bica cable railways.
About this model
The Santa Justa Lift is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline





