3D print the Shemer Art Center and Museum
A free, printable model of the Shemer Art Center and Museum, a low, tile-roofed building with courtyards and a covered porch, set on open ground beside a green patch, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About the Shemer Art Center and Museum
The Shemer Art Center and Museum, in Phoenix, Arizona, offers art education and has a gallery. Martha Shemer set it up in 1984 after buying a mission-style house on three acres, with the aim of keeping the property and giving it to the City of Phoenix for art education.
Budget constraints in 2010 nearly shut the center. In response, a group of citizens founded an association bearing the center's name, which helps manage and preserve the facility. Among the Phoenix Points of Pride is the Shemer Art Center and Museum.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 2 mm | 1:3,750 |
| 200 mm | 3 mm | 1:3,000 |
| 256 mm | 3 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Tile roofs and small courtyards
- The building is low and spread out, with tiled roofs, small courtyards and a covered porch. A larger print size keeps those details, and Full detail suits a fine nozzle and thin layers.
- One piece with the ground
- The Shemer Art Center and Museum is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Shemer Art Center and Museum takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
The Shemer Art Center and Museum is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Shemer Art Center and Museum STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. The Shemer Art Center and Museum grows with the print: about 2 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
