Sphinx Observatory in 3D
The Sphinx Observatory appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.
-
North
-
East
-
South
-
West
Copyright notice
The design of Sphinx Observatory may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.
- On a 160 mm print
- 7 mm
- Scale
- 1:3,750
7 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Thin railings and stilts
The terraces have fine railings and the lower platform stands on slim supports. Print friendly thickens them for small prints; Full detail keeps them on larger prints, ideally with a fine nozzle.
- Ribbed observatory dome
The dome and its ring rail are small, rounded details on top of the tower. A 0.12 mm layer height keeps the dome's ribs crisp, and printing slowly helps the top of the tower.
- One piece with the ground
The Sphinx Observatory is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Sphinx Observatory takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Sphinx Observatory
Above the Jungfraujoch in Switzerland stands the Sphinx Observatory, an astronomy observatory named after the Sphinx, the rocky summit it sits on. Its altitude is 3,571 m (11,716 ft), measured from mean sea level, which puts it among the world's highest observatories. It also has Switzerland's second highest observation deck, open to the public.
An elevator shaft is tunneled through the mountain top, leading up into the observatory from the railway station at the Jungfraujoch, the highest station of that kind in Europe. The building lies on the Valais side of the frontier, just a few meters from the canton of Bern. An open viewing deck next to the observatory looks toward the Jungfrau, Mönch and Eiger peaks.
Its scientific facilities are two large laboratories, a weather station for observations, a workshop and two experiment terraces, plus astronomical and meteorological cupolas. The astronomical cupola holds a 76 cm telescope. In 1949, plates of nuclear emulsion left out to cosmic rays here supplied the first precise evidence that the charged K-meson exists.
About this model
The Sphinx Observatory is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





