3D print St. Andrew's Church, Staten Island
A free, printable model of St. Andrew's Church and its grounds, with the roads, green space and small stream around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
8 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slim spire and cross
The tower ends in a tall, narrow spire topped with a small cross. Print friendly adapts the thinnest tip at small scale; Full detail suits a larger print. Print slowly and cool well.
- Long roof and fieldstone walls
The long pitched roof is ribbed and the walls carry fine stone texture. A layer height of 0.12–0.16 mm keeps those lines crisp.
- One piece with the ground
St. Andrew's Church, Staten Island is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. St. Andrew's Church, Staten Island takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About St. Andrew's Church, Staten Island
St. Andrew's is a historic Episcopal church on the north side of Richmondtown on Staten Island, where Arthur Kill and Old Mill Roads meet. The congregation dates to 1708, and the first church was built between 1708 and 1712, then expanded in 1770. British forces used it as a hospital during the American Revolutionary War.
Fires badly damaged the church in 1867 and 1872. Around 1872 it was rebuilt in Gothic style, with fieldstone walls and stop-ended chamfered red brick trim. Burch Hall, attached to it, was added in 1924 in a matching style. The rectory of 1818 is listed on the National Register as the Moore-McMillen House.
New York City designated the church a landmark in 1967, and the National Register of Historic Places followed in 2000. Several prominent Staten Island families are buried in its churchyard, including a number of Woods and the Johnston Family, who have a mausoleum. Rev. Richard Charlton, an early rector of the church, is also buried there.
About this model
St. Andrew's Church, Staten Island is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
