3D print St. Dunstan's Basilica
A free, printable 3D model of St. Dunstan's Basilica and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
St. Dunstan's Basilica in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 17 mm
- Scale
- 1:3,750
17 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tall, thin church parts
Tall, thin parts such as towers and pinnacles are the most fragile part of a church print. Print slowly with cooling, and use Full detail with a larger print size to keep fine points.
- One piece with the ground
St. Dunstan's Basilica is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. St. Dunstan's Basilica takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About St. Dunstan's Basilica
Charlottetown, on Prince Edward Island in Canada, is home to St. Dunstan's Basilica, the cathedral for the Diocese of Charlottetown. It takes its name from St. Dunstan, an Anglo-Saxon saint from Glastonbury. Its address is 45 Great George Street, with the harbor on one side and, on the other, the Confederation Centre of the Arts.
A first cathedral, St. Dunstan's, was built between 1897 and 1907. Fire destroyed it in 1913, and its replacement, a stone building, went up from 1913 to 1919 in the Gothic Revival style. Pope Pius XI raised it to Minor Basilica status on June 14, 1929, by the decree Edocet Nos Carolinopolitanus; Cardinal Pietro Gasparri signed and notarized it.
The church was completed in 1919, ten years before it became a basilica. In October 1980 a state funeral was held here for Daniel J. MacDonald, the Veterans Affairs Minister, with a eulogy from Prime Minister Pierre Elliot Trudeau. In 1990 the basilica received National Historic Site of Canada designation.
About this model
St. Dunstan's Basilica is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
