3D print Stolzenfels Castle
A free, printable model of Stolzenfels Castle and its surroundings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Stolzenfels Castle in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 10 mm
- Scale
- 1:3,750
10 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Small turrets and battlements
A castle has many small towers and pointed details. Try the Landmark detail setting "Print friendly" for a small print, or "Full detail" with a bigger size and a fine nozzle.
- One piece with the ground
Stolzenfels Castle is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Stolzenfels Castle takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Stolzenfels Castle
Stolzenfels Castle (Schloss Stolzenfels) stands near Koblenz on the Rhine's left bank, in Rhineland-Palatinate, Germany. It began as a medieval fortress built by Arnold II. von Isenburg, the Prince-Bishop of Trier, and was finished in 1259. Its job was to guard a toll station on the Rhine, where ships had to stop and pay. Over time it was enlarged more than once, particularly in the 14th century, until French forces destroyed it in 1689 during the Nine Years' War.
In the 18th century the ruin served as a quarry. In 1823 the city of Koblenz gave it to the crown prince of Prussia, Frederick William, later Frederick William IV, who had it rebuilt as a palace in Gothic Revival style. By 1842 the gardens and main buildings stood finished, and he opened the castle as his summer residence that year. He had been King of Prussia since 1840. Work on the interior was completed in 1850.
Designs came from Johann Claudius von Lassaulx and Karl Friedrich Schinkel (who drafted), from Friedrich August Stüler (who handled the building) and from Peter Joseph Lenné (the gardens). The Gothic chapel was inaugurated in 1845, during Queen Victoria's visit. The Upper Middle Rhine Valley gained UNESCO World Heritage Site status in 2002, and Stolzenfels is part of it.
About this model
Stolzenfels Castle is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
