3D print Suncoast Hotel and Casino
A free, printable model of Suncoast Hotel and Casino, a long hotel block with domed rotundas, and the parking lots and roads around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Suncoast Hotel and Casino
The Suncoast hotel and casino, at 9090 Alta Drive, is in Las Vegas, Nevada, and sits on 50 acres (20 ha). Work began in July 1999. The doors opened on September 12, 2000. A fireworks show lasting five minutes and costing $75,000 marked the occasion. At first only one half of the 10-story hotel building was finished, with 203 rooms. Because room occupancy ran high, an $11 million expansion in 2001 completed the other half.
Announced in July 1998, the project was first called the Sundance, with a price tag of $145 million, and was to rise on the northwest side, at the corner where Rampart Boulevard meets Alta Drive. A copyright conflict with the Sundance Film Festival led to the new name, Suncoast, in February 1999. Michael Gaughan's Coast Resorts owned the project, and Boyd Gaming later bought Coast Resorts in 2004. The 10-story hotel tower reached its top on March 22, 2000, and an American flag was placed above it.
The resort opened with a Mediterranean theme. The casino measured 7,200 m2 (78,000 sq ft), with 48 table games, a bingo hall of 600 seats and a large race and sportsbook. The resort also had 2,300 m2 (25,000 sq ft) of convention space, a 64-lane bowling alley and a movie multiplex that opened on September 15, 2000. A moving walkway linked the casino with a parking garage of 5,000 spaces.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 16 mm | 1:3,750 |
| 200 mm | 20 mm | 1:3,000 |
| 256 mm | 25 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Domed rotundas and small roofs
- Several small domes and pitched roofs cluster in the middle of the building. Print friendly adapts them to the print scale; a larger print size keeps more of them.
- Long, thin colonnade
- A long, slim colonnade reaches out from one side of the building. Print slowly with good cooling, and use layers of 0.12–0.16 mm to keep its thin posts crisp.
- One piece with the ground
- Suncoast Hotel and Casino is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Suncoast Hotel and Casino takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Suncoast Hotel and Casino is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Suncoast Hotel and Casino STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Suncoast Hotel and Casino grows with the print: about 16 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
