3D print Tabata Station (Tokyo)
A free, printable 3D model of Tabata Station in Tokyo with its surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Tabata Station (Tokyo) in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 8 mm
- Scale
- 1:4,063
8 mm tall on a 160 mm print
Make this print opens the generator on a 650 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Low station with fine details
A station is low and wide, with small details that can get lost at a small size. Print friendly adapts thin parts to the print scale; Full detail keeps more on a larger print. Try 0.12–0.16 mm layers.
- One piece with the ground
Tabata Station (Tokyo) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Tabata Station (Tokyo) takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Tabata Station (Tokyo)
JR East, formally East Japan Railway Company, runs Tabata Station, in Kita, Tokyo, Japan. The station lies on the Tōhoku Main Line. Yamanote Line trains, which run in a circle, call there, as do local and rapid Keihin–Tōhoku Line trains. It has exits on its north and south sides.
The station has two island platforms serving four tracks. The Yamanote tracks are the inner pair and the Keihin–Tōhoku tracks the outer pair, so passengers can change between the two lines across the same platform. In January 2015 the Yamanote Line platforms gained chest-high platform edge doors, which went into operation in February.
Tabata Station opened on April 1, 1896. JR East took control of it when JNR was privatized on April 1, 1987, and it was rebuilt from 2005 to August 2008. Since 2016 it has carried the numbers JY09 on the Yamanote Line and JK34 on the Keihin–Tōhoku Line. Tokyo Women's Medical University is in the surrounding area.
About this model
Tabata Station (Tokyo) is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
