3D print the Telšiai Cathedral
A free, printable model of Telšiai Cathedral, a long gabled church with one tower, and the streets and buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Telšiai Cathedral in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 13 mm
- Scale
- 1:3,750
13 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Small cupola and cross
The tower is topped by a small cupola with a thin cross. Use Full detail with a fine nozzle on a larger print, or Print friendly at small sizes, and print the top slowly with good cooling.
- One piece with the ground
The Telšiai Cathedral is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Telšiai Cathedral takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Telšiai Cathedral
Telšiai Cathedral, formally St. Anthony of Padua Cathedral, is a Roman Catholic church in Telšiai, Lithuania, and the seat of its diocese. Its history reaches back to 1624, when Paweł Stefan Sapieha, then Deputy Chancellor of Lithuania, established a Franciscan monastery and a wooden church at Insula Hill, located in the middle of the town.
A new brick church went up between 1762 and 1794. In 1802 Jan Boretti, an architect from Vilnius, was obliged to add two towers and a narthex, but he built just the narthex, and no reason is known. A tower followed in 1859, and the church became a cathedral after the diocese was established in 1926.
The building reflects features of Baroque and Classicism. It has a rectangular plan, a three-wall apse, one tower and a nave bordered by two aisles. Telšiai Cathedral is also the only church in Lithuania with a two-storey altar.
About this model
The Telšiai Cathedral is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





