3D print The Pinnacle (Guangzhou)
A free, printable model of The Pinnacle and the surrounding city blocks, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 360 m
- On a 160 mm print
- 98 mm
- Scale
- 1:3,750
360 m of The Pinnacle (Guangzhou), 98 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A tall tower
A tall tower has little material at the top. Print slowly with good cooling, and use 0.12–0.16 mm layers to keep the upper parts crisp.
- One piece with the ground
The Pinnacle (Guangzhou) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Pinnacle (Guangzhou) takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About The Pinnacle (Guangzhou)
The Pinnacle is 360 m (1,180 ft) tall with 60 stories in Guangzhou's Tianhe District, Guangdong, China. In Guangzhou, it is the fifth-tallest building. The tower is also known in Chinese by the name 广晟国际大厦, written 廣晟國際大廈 in traditional characters, and the building opened in 2012.
The tower was completed and opened in 2012, and it follows the postmodern style. It is listed as a skyscraper with 60 floors above ground, and its height of 360 m (1,180 ft) makes it the fifth-tallest building in Guangzhou. Its Chinese name, 广晟国际大厦, is used alongside the English name The Pinnacle.
About this model
The Pinnacle (Guangzhou) is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
