Tomb of Hafez in 3D
The Tomb of Hafez appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.
-
North
-
East
-
South
-
West
Copyright notice
The design of Tomb of Hafez may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.
- On a 160 mm print
- 3 mm
- Scale
- 1:3,750
3 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slender columns under the dome
The dome rests on thin columns. Print friendly adapts them to the print scale; printing slowly with good cooling helps tall thin parts.
- Tiny trim under the dome
The decorative edge below the dome is very small. A larger print with Full detail and a 0.12–0.16 mm layer height keeps more of it.
- One piece with the ground
The Tomb of Hafez is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Tomb of Hafez takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Tomb of Hafez
The Tomb of Hafez, commonly known as Hāfezieh, consists of two memorial structures at the northern edge of Shiraz, Iran, erected to honor the celebrated Persian poet Hafez. These open pavilions sit beside a seasonal river, on its northern bank, in the Musalla Gardens, and contain his marble tomb. Born in Shiraz in 1315, Hafez died there in 1390, and held a position as court poet. The tomb, its gardens and nearby memorials to other great figures form a focus of tourism in Shiraz.
A small structure with a dome-like shape was put up near his grave in 1452, by order of the Timurid governor Abul-Qasim Babur Mirza. A far more substantial memorial followed in the gardens in 1773, in the reign of Karim Khan Zand. It had four central columns and a room at each of its east and west ends, with the north and south sides left open. The present buildings stand on the site of these earlier structures; André Godard, a French architect and archaeologist, designed them.
In Godard's design the tomb is raised one meter above ground level and encircled by five steps. Eight columns, each ten meters tall, hold up a copper dome shaped like a dervish's hat, and the dome's underside carries arabesque work and colorful mosaic. The garden is divided by a talar, a hall of open columns that measures 7 by 56 meters. Sixteen more pillars joined the four of the 1773 hall, forming a long verandah that leads from the city toward the tomb.
About this model
The Tomb of Hafez is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





