3D print Tonhalle Düsseldorf
A free, printable model of Tonhalle Düsseldorf, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 31 m
- On a 160 mm print
- 10 mm
- Scale
- 1:3,750
31 m of Tonhalle Düsseldorf, 10 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Roofline and entrance
Concert halls have broad roofs and entrance details that are the finest parts in miniature. Print larger or choose Full detail so those edges stay clear.
- One piece with the ground
Tonhalle Düsseldorf is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Tonhalle Düsseldorf takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Tonhalle Düsseldorf
The Tonhalle in Düsseldorf is a concert hall. The architect Wilhelm Kreis built it, and it dates from 1926, when it was made for the GeSoLei exhibition and used as a planetarium. At the point of construction it was the largest planetarium in the world. During the 1970s the building was converted into a concert hall.
The Düsseldorfer Symphoniker are the resident orchestra; they play symphonic repertoire at the Tonhalle and give opera performances at the Deutsche Oper am Rhein. The building stands 31 m tall in the Pempelfort district of Düsseldorf and is also listed as an architectural heritage monument in North Rhine-Westphalia, Germany.
About this model
Tonhalle Düsseldorf is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
