3D print the Torre de Madrid
A free, printable model of the Torre de Madrid and the streets around Plaza de España in Madrid, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 142 m
- On a 160 mm print
- 40 mm
- Scale
- 1:3,750
142 m of the Torre de Madrid, 40 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A tall tower
A tall tower needs clean vertical edges. Slow the print for the upper floors, with cooling, and use 0.12–0.16 mm layers to keep the vertical edges crisp.
- One piece with the ground
The Torre de Madrid is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Torre de Madrid takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Torre de Madrid
The Torre de Madrid is a mixed-use high-rise on Plaza de España in Madrid. It is 142 m tall and has 36 floors; construction ran from 1954 to 1957. Julián and José María Otamendi Machimbarrena designed it for the Metropolitan Real Estate Agency, for which they had built the Edificio España in the same plaza. The tower holds offices and apartments, and at completion it was meant to be the world's tallest concrete building.
Until 1967 it was Western Europe's highest office building, when Brussels's 150 m South Tower overtook it. Before Torrespaña was built it was Madrid's highest building, and it stayed the tallest in Spain until 1982, when the Torrespaña telecommunications tower overtook it. Work finished on October 15, 1957.
The lead architects planned space for 500 stores, galleries, a hotel and a cinema, and equipped the tower with twelve elevators that could travel at 3.5 meters per second. In 2012 the building was redeveloped, with apartments on floors 10 to 32, and floors 1 to 9 became the Hotel Barceló Torre de Madrid in 2017.
About this model
The Torre de Madrid is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
