3D print Tottenham Hale station
A free, printable 3D model of Tottenham Hale station and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Tottenham Hale station in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 4 mm
- Scale
- 1:3,750
4 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Thin roofs and canopies
Station roofs and canopies can be thin, so Print friendly adapts them for a sturdy print. Full detail with a larger print size keeps more of their original thinness.
- One piece with the ground
Tottenham Hale station is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Tottenham Hale station takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Tottenham Hale station
Tottenham Hale is an interchange station in north London, serving both London Underground and National Rail. The National Rail platforms are on the West Anglia Main Line, in its Lea Valley Lines section, with London Liverpool Street 6 miles (9.7 km) away. Greater Anglia and Stansted Express trains call there. The Victoria line serves it too, with Blackhorse Road on one side and Seven Sisters on the other.
Under the name Tottenham, the station opened on September 15, 1840, on a Northern & Eastern Railway route running from Stratford to Broxbourne. Until 1868 it served as a railhead for livestock from East Anglia; the cattle were unloaded and walked along what is now the A10 toward London. It was renamed Tottenham Hale on September 1, 1968, when it became an interchange with the London Underground as the Victoria line's first stage opened.
A new station building and an extra platform were added in a regeneration scheme. After the 2011 England riots, which started in Tottenham, the tube, bus and rail stations were redeveloped in part to attract investment. The bus and rail interchange scheme, costing £110 million, was finished in 2014. The bus station has an ETFE roof, a material the Eden Project uses as well, and that roof was a finalist for two design awards.
About this model
Tottenham Hale station is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
