3D print Tour Landscape
A free, printable 3D model of Tour Landscape in La Défense and its surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Tour Landscape in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 101 m
- On a 160 mm print
- 29 mm
- Scale
- 1:3,750
101 m of Tour Landscape, 29 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A tall office tower
Office towers are tall and plain, so the main concern is the slender top. Print friendly adapts thin parts to the print scale; printing slowly, with good cooling, helps tall parts, and a 0.12–0.16 mm layer height keeps vertical edges crisp.
- One piece with the ground
Tour Landscape is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Tour Landscape takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Tour Landscape
Tour Landscape is an office skyscraper in La Défense's business district, at Place des Degres in Puteaux, France. It was formerly known as the IBM Europe tower, the Pascal tower and the DDE tower. Wikidata gives it 28 floors above ground and an area of 64,000 m².
In 2017 a modernization project was announced that would merge the two towers, known as Tours Pascal, and raise the total height to 101 meters. Work began in the summer of 2017 under the new name Tour Landscape. That name replaced the ones the building had carried before, and the project was described as a restructuring of the existing towers.
About this model
Tour Landscape is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
