3D print Tour Les Poissons
A free, printable model of Tour Les Poissons in Courbevoie and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Tour Les Poissons in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 130 m
- On a 160 mm print
- 35 mm
- Scale
- 1:3,750
130 m of Tour Les Poissons, 35 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A tall tower
On a tall tower, a layer height of 0.12–0.16 mm keeps vertical edges crisp, and printing slowly with good cooling helps the upper floors. Print friendly adapts small details to the print scale; a larger print keeps more of them.
- One piece with the ground
Tour Les Poissons is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Tour Les Poissons takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Tour Les Poissons
Tour Les Poissons, called Tour Ciel in corporate real estate circles, is a skyscraper of 42 stories and 129.5 m (425 ft) in Courbevoie, Hauts-de-Seine, France. People often group it with the office towers of La Défense, but it stands half a mile northeast of that district, inside a smaller mixed-use complex named Centre Charras, where it is the highest building. It was completed in 1970. From its inauguration until Tour Montparnasse opened in 1973, no building designed for occupancy in France was higher.
The tower belongs to an ensemble called Zodiaque, and its name refers to the zodiac sign Pisces. Its design joins a white tower to a smaller black tower, meant to suggest two interlocked fishes. It was meant purely as housing, yet security rules at the time limited residential use to thirty floors, so the remaining floors became offices. A medical center and corporate offices fill the lower two floors and the top ten.
The building used to carry a 22 m (72 ft) concrete cylinder on top, a barometer glowing green or blue to show atmospheric pressure. It was taken down in October 2006. The office floors were renovated in 2007–08 under architect Xavier Sterlin and marketed as Tour Ciel (Sky Tower), while the residential section kept the name Tour Poissons.
About this model
Tour Les Poissons is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
