3D print Tri-State Warbird Museum Hangars
A free, printable 3D model of the Tri-State Warbird Museum hangars, generated in your browser from real map data, with the surrounding area included.
-
North
-
East
-
South
-
West
The model you print
Tri-State Warbird Museum Hangars in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 2 mm
- Scale
- 1:3,750
2 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Low, wide hangar roofs
Hangars are low and wide, so there is little height to worry about, but small details such as doors and roof edges are tiny. A larger print or Full detail with a fine nozzle keeps more of them.
- One piece with the ground
Tri-State Warbird Museum Hangars is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Tri-State Warbird Museum Hangars takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Tri-State Warbird Museum Hangars
The Tri-State Warbird Museum is an aviation museum, private and not-for-profit, in Batavia, Ohio, in Clermont County, beside the Clermont County Airport. David O'Maley Sr. formed the museum in 2003, and it opened to the public on May 21, 2005. O'Maley previously served as chief executive of the Ohio National Life Insurance Company.
The museum focuses on World War II, so every aircraft on display comes from that period. Its goal is to preserve and operate the aircraft, and each one either flies already or will be restored to flying condition. The museum also shows a barracks exhibit from the World War II period.
A second hangar went up in 2011 after a large donation, giving the museum more space for aircraft. In 2016 a P-40 belonging to the museum took the World War II Grand Champion prize at EAA AirVenture Oshkosh. A B-25 from the museum flew to Sardinia, Italy in 2018 to take part in filming Catch-22.
About this model
Tri-State Warbird Museum Hangars is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
