3D print Tulsa Air and Space Museum & Planetarium Hangars
A free, printable model of the Tulsa Air and Space Museum hangar and its entrance block, with the roads and open grounds around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Tulsa Air and Space Museum & Planetarium Hangars
In Tulsa, Oklahoma, the Tulsa Air and Space Museum occupies the northwest corner of the airport grounds of Tulsa International. It offers 19,000 square feet, or 1,800 m2, of exhibits on history, vintage aircraft and hands-on activities. A planetarium with a full dome was added in 2006. Schools, summer camps and Scout groups use its educational facilities.
In May 1998 the museum opened in a hangar from the 1940s on the campus of the Spartan School of Aeronautics. By 2005 it had moved into Hangar One, named for Sherman and Ellie Smith, which gave it more room. The planetarium followed in 2006.
The exhibits in Hangar One run in chronological order through the history of aviation in Tulsa. One exhibit features a replica, at scale, of the airport's first terminal, an art deco building designed by Leon B. Senter. Others cover the Pearl Harbor survivors, World War II, commercial aviation and space. Aircraft on display include an F-14 Tomcat, a Spartan NP-1, and a Spartan C-2, among the few of its kind that survive.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 3 mm | 1:3,750 |
| 200 mm | 4 mm | 1:3,000 |
| 256 mm | 4 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Arched hangar roof
- The hangar has a long, gently arched roof with a small entrance block at one corner. Print friendly simplifies the small roof and entrance details; Full detail keeps them at larger print sizes.
- One piece with the ground
- Tulsa Air and Space Museum & Planetarium Hangars is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Tulsa Air and Space Museum & Planetarium Hangars takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Tulsa Air and Space Museum & Planetarium Hangars is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Tulsa Air and Space Museum & Planetarium Hangars STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Tulsa Air and Space Museum & Planetarium Hangars grows with the print: about 3 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
