Vancouver City Hall in 3D
Vancouver City Hall appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.
-
North
-
East
-
South
-
West
Copyright notice
The design of Vancouver City Hall may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.
- On a 160 mm print
- 14 mm
- Scale
- 1:3,750
14 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tall central tower
The tower rises well above the wings and ends in a stepped top with a clock. Print slowly with good cooling for the top, and use a layer height of 0.12–0.16 mm to keep the vertical lines crisp.
- Narrow piers and the clock face
Narrow vertical piers and a small round clock face are fine details. Print friendly adapts them to the print scale; Full detail keeps them on a larger print.
- One piece with the ground
Vancouver City Hall is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Vancouver City Hall takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Vancouver City Hall
Vancouver City Hall, home to Vancouver City Council, stands at 453 West 12th Avenue in Vancouver, British Columbia, Canada. The Vancouver Civic Building Committee ordered the building. Fred Townley and Matheson designed it, and Carter, Halls, Aldinger and Company built it. It has a 12-story tower with a clock on top, and the point is 98 meters (322 ft) tall. On the Canada Line of the SkyTrain, Broadway–City Hall station serves the building.
Between 1897 and 1929, city hall stood on Main Street, a little south of the Carnegie Library, and in 1929 it moved into the Holden Building, built in 1911. After Gerry McGeer was elected mayor in 1934, he appointed a three-man committee to choose a location for a new city hall. The panel recommended Strathcona Park, and in 1935 City Council approved that site, so Vancouver became the first major Canadian city to place its city hall beyond its downtown.
Construction began on January 3, 1936, Vancouver's Golden Jubilee year, and McGeer laid the first cornerstone on July 2. At the front stands a 2.4-meter (8 ft) statue depicting Capt. George Vancouver, made by Charles Marega. Construction cost CA$1 million, and the building was finished on December 1, 1936. The ceiling of the rotunda's second floor is covered in gold leaf from several mines in British Columbia. A four-story east wing was built from 1968 to 1970, and in March 1976 the original building received Schedule A heritage status.
About this model
Vancouver City Hall is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline





