3D print the Wrigley Building
A free, printable model of the Wrigley Building and the surrounding streets and buildings of Chicago, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Wrigley Building in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 130 m
- On a 160 mm print
- 39 mm
- Scale
- 1:3,750
130 m of the Wrigley Building, 39 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Two towers, one clock
The two towers differ in height, and the south one carries a clock. Print friendly adapts small details to the print scale; a larger print or Full detail keeps more of them.
- Slow and cool for the upper stages
Tall tower tops are the thinnest parts. A layer height of 0.12–0.16 mm and slower printing with good cooling help them print cleanly.
- One piece with the ground
The Wrigley Building is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Wrigley Building takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Wrigley Building
Chicago's Wrigley Building is a commercial skyscraper whose address is 400–410 North Michigan Avenue, on the Near North Side. It stands along the Magnificent Mile, facing the Tribune Tower across Michigan Avenue. Its two towers were constructed from 1920 to 1924 as the headquarters for the Wrigley Company. The architectural firm Graham, Anderson, Probst & White designed it, shaping the towers after the Giralda tower in Seville's Cathedral and adding French Renaissance details.
The south tower, 425 feet (130 m) tall, was completed in September 1921; the north tower followed in May 1924. Thirty stories make up the south tower, while the north tower has 21. The south tower carries a clock whose faces point in all directions, each 5.97 m (19 feet 7 inches) across. Walkways link the towers at ground level and at the third floor, and another was added at the fourteenth floor in 1931.
Glazed terra cotta gives the building its bright white facade, and floodlights light it at night. Ground was broken in 1920, a time when the area north of the Chicago River had no major office buildings, and the Michigan Avenue Bridge to the south was still being built. William Wrigley Jr., a chewing gum magnate, selected the land. It was also the first air-conditioned office building in Chicago.
About this model
The Wrigley Building is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
