3D print Mount Baker and the Railroad Grade Trail
Mount Baker on one print, with the Railroad Grade Trail raised in orange on the terrain. Open it in the generator, change the size or colors, and export a slicer-ready 3MF.
Railroad Grade Trail
- Side
- South
- On the print
- 3.2 km, as mapped in OpenStreetMap
3,286 m of mountain, 43 mm on your shelf
The print covers 15 by 15 km. On a 160 mm print the summit stands 43 mm above the valleys.
- Taller than life
The print opens with the Elevation multiplier at 1.5, so the mountain stands 1.5 times its true height and its shape reads clearly at this size. Set it to 1 for true scale.
- The trail
The Railroad Grade Trail prints as a raised 1.2 mm orange line, drawn from its OpenStreetMap route. Give it its own filament color, or turn it off on the GPX tab.
- Colors
Forest, meadow, bare rock, ice and water each get their own color where the land has them, so a multi-color printer shows where the trees give way to rock.
About Mount Baker
Mount Baker, also known as Koma Kulshan, is a 10,781-foot (3,286 m) active, glacier-covered stratovolcano in the North Cascades of Washington, about 30 miles (48 km) east of Bellingham.
After Mount Rainier it has the heaviest glacier cover of the Cascade volcanoes. Edmund Coleman's party first reached the summit on August 17, 1868.
The Railroad Grade Trail
The Railroad Grade Trail climbs the mountain's south side, below its glaciers.
The print draws the trail from OpenStreetMap, as mapped there at about 3 km.
Next to the others
How Mount Baker measures up
Common questions
Is the Mount Baker 3D print free?
Yes. The generator runs in your browser and exports a 3MF file you can open in any common slicer. There is no account or payment.
Is the Railroad Grade Trail on the print?
Yes. Print this mountain adds it from its OpenStreetMap route (3.2 km as mapped) and raises it on the terrain. The footprint is 15 by 15 km, centered on the summit and wide enough for all of it.
Is the mountain printed at its true height?
It starts at 1.5 times its true height, about 43 mm of relief on a 160 mm print, because true scale looks flat at this size. Set the Elevation multiplier to 1 for true scale, or higher for a more dramatic model.
Can I get an STL instead of a 3MF?
The generator exports 3MF, which keeps each color as its own part. Any slicer can open it and save an STL if you need one.
