3D print Audi Field
A free, printable model of the stadium's braced stands and roofs around the pitch, with the wide roads, open lots and nearby buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 10 mm
- Scale
- 1:3,750
10 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Diagonal bracing and thin masts
Diagonal bracing and a few thin masts rise around the stands. Print friendly adapts these slim parts to your print scale; Full detail keeps them, so print larger and slowly for the tall masts.
- Fine lines on the stand roofs
The stand roofs are covered in thin parallel lines. A larger print keeps more of them, and layers of 0.12 to 0.16 mm keep them crisp.
- One piece with the ground
Audi Field is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Audi Field takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Audi Field
Audi Field is a stadium designed for soccer, in Washington, D.C.'s Buzzard Point neighborhood. Its tenants are three soccer clubs, D.C. United, DC Power FC and the Washington Spirit, plus the football team DC Defenders. The stadium holds 20,000 people. Because of advertising rules, it goes by the name Washington, D.C. Stadium in North American competitions.
Before Buzzard Point, D.C. United had explored sites across the Washington metropolitan area. A first stadium proposal fell through in 2006, and the two proposals after it were never built either. The club looked at unused land at Buzzard Point in January 2011, and Buzzard Point was named the stadium site in July 2013. Ground was broken in February 2017, and the stadium was finished in July 2018.
In July 2013 the city and D.C. United reached a preliminary agreement for a $300 million stadium at Buzzard Point. Under it, the club would put $150 million into building on land owned by the city, with a lease of 20 to 35 years. The D.C. City Council approved the Buzzard Point plan on December 17, 2014, in legislation that significantly revised the July 2013 agreement.
About this model
Audi Field is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
