3D print the Campo de O'Donnell
A free, printable model of the Campo de O'Donnell site in Madrid, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Campo de O'Donnell in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 2 mm
- Scale
- 1:3,750
2 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Low site, fine edges
A former stadium site is low and open, so the ground and street edges carry the shape of the print. Print friendly adapts thin parts and small details to the print scale; a larger print keeps them better.
- Layers for a flat site
With little height, crisp edges matter most. Layers of 0.12 to 0.16 mm help keep the ground and street lines clean.
- One piece with the ground
The Campo de O'Donnell is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Campo de O'Donnell takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Campo de O'Donnell
Campo de O'Donnell was a stadium in Madrid, Spain, used for several sports. It started as a field in the O'Donnell district beside Calle de O'Donnell, the main boulevard. Another ground, Campo de O'Donnell (Atlético Madrid), had the same name and stood 200 meters (700 ft) away on that boulevard. The two grounds shared a name and a boulevard.
Real Madrid made it their home ground in 1912, and it held 5,000 spectators. Real Madrid also owned the ground. In 1923 the club left for Campo de Ciudad Lineal, and the O'Donnell ground closed. Four Copa del Rey finals were played there, in 1908, 1909, 1913 and 1918.
About this model
The Campo de O'Donnell is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
