3D print Gliwice Arena
A free, printable model of Gliwice Arena in Gliwice, with its surrounding roads and green slopes, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Gliwice Arena in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 10 mm
- Scale
- 1:3,750
10 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Oval drum and ribbed walls
The arena is a broad oval drum under a gently curved roof, with fine ribbing and many small panels around its walls. Print friendly adapts the thin ribs and roof rim; Full detail keeps them on a larger print.
- Roof edge and vents
The roof edge has a ribbed band and rows of small raised vents. A 0.12 to 0.16 mm layer height keeps those small forms crisp, and a larger print helps them survive.
- One piece with the ground
Gliwice Arena is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Gliwice Arena takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Gliwice Arena
The Gliwice Arena is a multi-purpose indoor venue in the Polish city of Gliwice. Its four stands hold 13,752 seated spectators, and standing room raises the total to 17,178. That makes the hall one of Poland's largest indoor arenas. The venue opened in May 2018, and it also carries the sponsor name PreZero Arena Gliwice.
Work started in 2013, after the demolition of the 20th Anniversary of the Polish People's Republic Stadium that previously occupied the site. The project was financed entirely from the city budget after hopes of European Union funding did not work out. Planners first expected the hall to be ready by mid-2015 for 321 million zł. Spending across 2017 and 2018 came to 420.4 million zł, roughly €98 million and 31% above the earlier estimate. Mirbud S.A. was the main contractor.
A two-story parking deck on site provides 800 spaces, and its top floor can host events or open-air exhibitions. A separate training hall and fitness building sit beside the main arena, and the building contains Europe's highest climbing wall. The arena opened officially on May 12, 2018; that month it also hosted a women's run held to raise awareness of breast cancer.
About this model
Gliwice Arena is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
