A white 3D print of Incheon Munhak Stadium, its bowl ringed by white columns and a crown of pointed membrane tents with slim needles at their tops, among the surrounding streets and buildings.

Incheon Munhak Stadium in 3D

Incheon Munhak Stadium appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Incheon Munhak Stadium model, North view North
  • Incheon Munhak Stadium model, East view East
  • Incheon Munhak Stadium model, South view South
  • Incheon Munhak Stadium model, West view West

© OpenStreetMap contributors

Copyright notice

The design of Incheon Munhak Stadium may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.

On a 160 mm print
23 mm
Scale
1:3,750

23 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Tent crown and needles

    Each pointed membrane tent carries a slim needle at its high point, and they vary in height around the ring. Full detail keeps every tent for a large print; on a small one, Print friendly adapts the needles.

  2. Thin columns under the rim

    The roof's outer edge rests on slender columns set at the ring's corners, with an open gap above the seats. Printing at 0.12 to 0.16 mm keeps those columns and the front truss clean.

  3. One piece with the ground

    Incheon Munhak Stadium is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Incheon Munhak Stadium takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Incheon Munhak Stadium

Incheon Munhak Stadium, in Incheon, South Korea, contains a stadium used for several sports, a separate baseball park and further sports facilities. The complex also goes by Incheon World Cup Stadium or plain Munhak Stadium, and the baseball park beside the main stadium is the home of the SSG Landers.

The main stadium opened on February 25, 2002, under its first name, Incheon World Cup Stadium. Three group stage matches of that year's FIFA World Cup were played there, and the 2005 Asian Athletics Championships were held in it as well. From 2004 to 2011 it was the home ground of Incheon United.

The stadium later hosted the football matches of the 2014 Asian Games, and staged the opening and closing ceremonies for the Asian Para Games of 2014. In November 2018 it was the venue for the final of the League of Legends World Championship.

About this model

Incheon Munhak Stadium is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits