3D print the José Amalfitani Stadium
A free, printable model of the José Amalfitani Stadium, an open concrete bowl with raised upper tiers on two sides and a floodlight mast behind each corner, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 13 mm
- Scale
- 1:3,750
13 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Floodlight masts at the corners
Four tall masts stand behind the corners, each with a lamp bank turned toward the pitch, and they are the highest parts of the model. They print best slowly; Full detail keeps the heads on a large print.
- Open bowl with raised tiers
There is no roof, so nothing hides the seating: steep terraces at both ends and upper tiers reaching out over an open frame on the sides. A larger print keeps the stair towers' round portholes readable.
- One piece with the ground
The José Amalfitani Stadium is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The José Amalfitani Stadium takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the José Amalfitani Stadium
The José Amalfitani Stadium occupies a site in Liniers, a neighborhood of Buenos Aires in Argentina, near Liniers railway station. It is also called Estadio Vélez Sarsfield, and its nickname is El Fortín de Liniers. Vélez Sarsfield, of the Argentine Primera División, plays at home there. The name honors José Amalfitani, president of the club for 30 years.
The club obtained the site in 1941 and built the ground between 1941 and 1943 on a swamp of the Maldonado Stream, which made construction difficult. It opened on April 11, 1943 with a 2–2 draw against River Plate, and the wooden stands came across from the old ground at Villa Luro. Concrete stands followed, inaugurated on April 22, 1951.
Renovation and enlargement came later, ahead of the 1978 FIFA World Cup. Capacity stands at 49,540 spectators, and not all of them are seated, as at most Argentine grounds. Los Pumas, the Argentina national rugby union team, use it as their national stadium and usually play their highest-profile tests there.
About this model
The José Amalfitani Stadium is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
