A white 3D print of the Kibbie Dome, a long building under a smooth barrel-arched roof with low buildings at its ends, set among roads, grass fields and green hillside.

3D print the Kibbie Dome

A free, printable model of the Kibbie Dome and the roads, fields and hillside around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Kibbie Dome model, North view North
  • Kibbie Dome model, East view East
  • Kibbie Dome model, South view South
  • Kibbie Dome model, West view West

© OpenStreetMap contributors

The model you print

Kibbie Dome in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

Real height
45 m
On a 160 mm print
15 mm
Scale
1:3,750

45 m of the Kibbie Dome, 15 mm on your shelf

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. One broad smooth arch

    Most of the model is a single wide curved roof. Layer lines can show on a curve, so a layer height of 0.12 to 0.16 mm gives a smoother arch than coarser layers.

  2. Small buildings at the ends

    Low blocks and stairs sit against the ends of the roof. Print friendly adapts small details to the print scale; Full detail keeps them, which suits a larger print.

  3. One piece with the ground

    The Kibbie Dome is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Kibbie Dome takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Kibbie Dome

The Kibbie Dome is an indoor athletic stadium for many sports, on the University of Idaho campus in Moscow, Idaho. The name is misleading, since a barrel-arched roof covers the stadium rather than a dome. The Idaho Vandals use it for four sports: tennis, soccer, football and indoor track and field. It has 16,000 permanent seats, and its playing surface sits 795 m (2,610 ft) above sea level.

It opened in October 1971 as an outdoor concrete football stadium, replacing the old wooden Neale Stadium, which had been demolished. After the 1974 season the stadium got its barrel-arched roof and end walls, and in September 1975 it reopened fully enclosed. The roof spans 120 m (400 ft) from sideline to sideline and reaches a maximum height of 45 m (150 ft) above the hashmarks.

The enclosure took ten months and $1 million. The Trus Joist Company of Boise won the contract and used it to show off its engineered wood products, when steel and aluminum were the usual materials for domes. In 1976 the American Society of Civil Engineers gave the roof a structural engineering achievement award. The stadium was named after William H. Kibbie, a construction executive who was a primary benefactor of the project. Its Tartan Turf field, installed in 1972, was the first one-piece field in the world.

About this model

The Kibbie Dome is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Outside the United States this design may still be protected; check the rules where you sell.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits