3D print the London Coliseum
A free, printable model of the London Coliseum in St Martin's Lane, Westminster, with the surrounding streets and buildings of the West End, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 12 mm
- Scale
- 1:3,750
12 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A theater packed into a street
The house fills a tight Westminster site, with its front on St Martin's Lane and other buildings close on either side. Print it larger, or choose Full detail, so the theater still reads against its neighbors.
- Layers along the street front
Layers of 0.12 to 0.16 mm keep the top edges of the street front crisp, and printing slowly helps the long vertical faces come out even.
- One piece with the ground
The London Coliseum is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The London Coliseum takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the London Coliseum
The London Coliseum in St Martin's Lane, Westminster, which also goes by the name Coliseum Theatre, opened on December 24, 1904 under the name London Coliseum Theatre of Varieties. Frank Matcham designed it for the impresario Oswald Stoll, with the ambition of making it the largest and finest music hall of the age, a people's palace of entertainment. When it was built it was one of the few theaters in Europe with lifts for patrons going to the upper levels, and the first in England with a triple revolve on its stage.
Seating runs to 2,359, more than any other theater in London, though the original design allowed for 2,939 people on four levels. The stage is 92 feet deep and 55 feet wide, the proscenium arch is the widest in London and the house was among the first to be lit by electricity. The opening variety bill failed and the venue closed in 1906, reopening in December 1907.
Between 1931 and 1968 the building was called the Coliseum Theatre, a period that began with a run of White Horse Inn from April 8, 1931 that reached 651 performances. In 1968 the Sadler's Wells Opera Company arrived, and in 1974 it became the English National Opera; the company bought the freehold for £12.8 million in 1992. It is used mainly for opera, and the English National Ballet has its London home there.
About this model
The London Coliseum is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
