3D print Memorial Stadium (Clemson)
A free, printable model of Memorial Stadium at Clemson, with its tiered seating bowl and rows of tall exterior columns, among roads and green fields, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 18 mm
- Scale
- 1:3,750
18 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Many fine seating tiers
The bowl is made of many fine rows of seating tiers. A larger print shows them more clearly, and Print friendly adapts the finest rows to your print scale.
- Tall exterior columns
Slender columns line the outer walls, and thin posts stand along the upper rim. Print friendly adapts these thin parts; Full detail keeps them, best with 0.12 to 0.16 mm layers.
- One piece with the ground
Memorial Stadium (Clemson) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Memorial Stadium (Clemson) takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Memorial Stadium (Clemson)
Death Valley is the nickname of Frank Howard Field at Memorial Stadium, an outdoor ground on the Clemson University campus, near Clemson, South Carolina. The Clemson Tigers, a football team in the Atlantic Coast Conference, play there. It was built from 1941 to 1942 and first named Memorial Stadium to honor Clemson men who gave their lives for their country. In 1974, after Frank Howard, its long-serving head coach and athletic director, retired from the university, the playing surface was announced to be named for him.
Clemson officials decided to replace old Riggs Field with a new stadium in the valley on the western part of campus. The first version had 20,500 seats, made up the lower half of the south grandstand, and cost $125,000 to build. Carl Lee of Charlotte, North Carolina, designed it with H. E. Glenn, a professor in the engineering faculty. It opened on September 19, 1942, with a 32–13 win over Presbyterian College. Scholarship athletes did much of the early construction.
Sideline seats were added in 1958 and west end zone seats in 1960, and aluminum seats replaced the original cedar wood in 1972. The south upper deck was built in 1978, and 1983 brought the north upper deck, lifting capacity over 80,000. The nickname Death Valley comes partly from California's Death Valley National Park and partly from the university cemetery, on a hill that used to look down on the field until the upper decks were built. Frank Howard started using the nickname in the 1950s.
About this model
Memorial Stadium (Clemson) is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
